'Click-In' Battery Links & Shocks Body Mounts Off-Road Tires
The composite ladder chassis offers a stable backbone to the MSA-1E's 4-Link suspension and shocks. With an on-axle steering servo at the front and secure battery compartment at the rear, the MSA-1E offers a perfect balance of scale looks and performance.
All MSA-1E rigs are 'LED Ready'. The front bumper has two spotlights, the roll cage four. Illuminate your way by adding the optional LED kit that plugs directly into the combined Rx/ESC units with a dedicated LED port.
The 2.0 Gearbox
The MSA-1E 2.0 brings to the table an upgraded Gearbox with a 25% Lower Gearing of 81:1. When combined with the new 130 sized High Torque Motor and Metal 12t Pinion, this all combines to offer a new emphasis on Low RPM Drivability and Throttle Finesse. Never before has a 1/24th rig offered so much Torque at all points of the RPM range.
The MSA-1E Range offers a variety of body types, with a nod to the most Iconic and retro Off Road classics. In our world of tiny scale Adventures there's truly something to excite any age or level of RC experience.
The MSA-1E generates amazing grip levels by utilizing permanent 4WD and using locked axles. The center casing and locker are common to both front and rear, but the modular design allows front or rear modules to be attached, meaning they are easier to maintain and repair.
Optional Alloy Shock
For simplicity, and to minimize maintenance, friction dampers are utilized. The compression and rebound of these shocks has been designed to perfectly match the weight of the MSA-1E Rigs, soaking up the bumps when trail running, and offering the perfect amount of articulation when rock crawling
2.4 Ghz Radio 130 Can High Torque Motor High Torque Servo NiMH Battery
The MSA-1E platform uses our own CTX-2000 2.4G KD PROPO Radio. With built in F.H.S.S technology as standard, offering interference and glitch free operation, 'Smart Throttle 1-2-3' technology, channel trims, channel reversing and end point adjustment. It's the perfect size for any age and hand size to use, while still offering full sized performance and range.
The MSA-1E 2.0 is supplied fitted with a new bigger 130 Can Motor. It's been especially developed for this new platform and offers a 46% Increase In Torque over industry standard 1/24th 130 Can Brushed Motors. It offers both unsurpassed low end throttle finesse and torque for crawling, or when required, higher RPM and wheel speed for Bashing and Trail Running.
All MSA-1E rigs are fitted with true 3-wire hobby grade high torque micro steering servo's. They offer precise steering control and enough power to keep the rig headed on your chosen line.
The included 130MAH NiMH battery can be safely charged via the included 5v USB slow charger. It offers weight over the axle and swapped out in seconds via the clip in battery holder on the chassis.
Combo ESC & Rx
The MSA-1E is controlled by our own KD PROPO ARC-2000 combined RX/ESC with smart drag brake functionality. The MSA-1E Platform is also ‘FPV & LED Ready’, with a dedicated power socket to power all-in-one FPV Cams and separate LED power port to power our add-on LED kit. It's form factor fits perfectly into the tiny MSA-1E chassis and its layout clear and concise to understand.
All our MSA-1E Rigs include 2.4Ghz KD PROPO Radio's with Smart Throttle 1-2-3 (Beginner mode, Intermediate and Expert Throttle Profiles), KD PROPO RX/ESC with Smart Drag brake, 5V Port for FPV module and LED Port Ready, High Torque Motor (with Protection Circuit), Hobby Grade High Torque Micro Servo, 5v USB Charger, 130MAH NiMH Battery, and AA Batteries for the Tx are also included!